belt joint
英 [belt dʒɔɪnt]
美 [belt dʒɔɪnt]
网络 皮帶接合; 带接; 皮带接头; 皮带接合,皮带扣; 皮带接合
双语例句
- Analysis on the leakage caused by broken of watertight belt at expansion joint
变形缝处止水带断裂漏水原因分析及处理 - Special PU blade: It has characters such as wear resistance, low friction, high elasticity, impact resistance, long working life, no damage to conveyer belt and mechanical joint.
特种聚氨酯刀片：具有耐磨损，低摩擦，高弹性，抗冲击，使用寿命长的特点，不损伤输送带和机械接头。 - On fatigue strength test rig for rubber belt joint
橡胶带接头疲劳强度测试实验台的研究 - Improvement of Steel Wire Rope Core Belt Lacing Lap Joint Craftwork
钢丝绳芯输送带接头搭接工艺的改进 - Due to the different motorcycle models, motorcycle two transmission methods are belt drive, chain drive, and three kinds of universal joint drive shaft transmission mode.
由于摩托车机型的不同，摩托车二级传动方式有皮带传动、链传动和万向节轴传动三种传动方式。 - Management of steel cable conveying belt and vulcanizing joint
钢丝绳芯输送带及硫化接头的管理 - By analyzing the factors affecting the joint strength of transportation belt, and taking into account production requirements, methods of enhancing the joint strength of the belt are suggested.
通过分析影响运输胶带接头强度的因素，结合生产实践，提出提高运输胶带接头强度的方法。 - The Selection and Construction Form of Steel Cable Strong Belt Joint
钢丝绳芯强力皮带接头形式的选择与施工 - Through the analysis of current situation of belt joint and dust in picked refuse workshop and practice on improvement technology, the authors give a reference for dust improvement in cleaning plant.
通过对选煤厂皮带头和矸选车间扬尘现状及治理技术的分析与实践，为煤矿选煤厂扬尘治理提供一个借鉴。 - Improvement of vulcanized cementing technology of transporting nylon belt's joint
尼龙运输皮带接头硫化胶接工艺的改进 - Vulcanization and maintenance of belt joint of wire rope
浅谈钢丝绳芯胶带接头的硫化与管理 - Through ways of analyzing the ordinary and expanded concrete and their crack-calculations, it has, in this article, introduced the idea of expanded belt, so that the post-casting joint is eliminated and eventually a jointless underground construction is achieved.
本文通过对普通混凝土及膨胀混凝土的胀缩分析及裂缝计算，提出膨胀加强带新概念，用以代替地下结构施工的后浇带，实现地下结构无缝施工，并通过试验研究。 - The management of belt and belt joint is the key of ensuring conveyor normal operation This paper introduces the using and repairing method and management method of the conveying belt vulcanizing joint
胶带与胶带接头的管理好坏是保证输送机正常运转的关键。本文详细地介绍了钢丝绳芯输送带的使用和维护方法，以及输送带硫化接头的管理办法 - In the construction, crack control technology was successfully applied, concrete continuously placed in one time, no any later-poured belt or construction joint reserved during concrete placement.
施工中成功应用混凝土裂缝控制技术，混凝土施工时不留置任何后浇带或施工缝，一次性连续浇捣成型。 - The Vulcanizing Process Analysis and Maintenance of Conveying Belt Joint
输送带接头硫化工艺分析及维护方法 - Methods: To use new designed belt for the child after intracardiac repair under direct vision, chondrosternoplasty and congenital dislocation of hip joint.
方法：对原有胸带和腹带进行改进，设计制作四头胸腹带，主要用于心内直视术后、漏斗胸矫形术后及先天性髋关节脱位牵引的患儿。 - Laboratory experiments show that it is feasible and applicable to monitor steel-cord conveyor belt joint breaking by Hall transducer.
实验和模拟运行结果表明：本文所述的用于钢绳芯皮带横向断裂监测的方法是可行的。 - Dust Improvement of Belt Joint and Picked Refuse Workshop in Pinghu Coal Cleaning Plant
坪湖选煤厂301皮带头和矸选车间扬尘治理 - On line check equipment of steel core, belt and joint is studied and applied. The analysis and calculate of collected signal are successfully realized. The correspondent display and alarm signed export are in progress.
钢芯胶带及接头在线检测装置的研究及应用，成功地实现了对所采集信号的分析计算，并做出相应的显示、报警信号输出，实现了钢芯胶带及接头在线检测。 - The gentle slope belt of structure has a control function on oil and gas accumulation. Structure, lithology and the matching relation of faults etc can joint control hydrocarbon accumulation.
构造的缓坡带对油气聚集具有控制作用，构造和岩性以及断层的匹配关系等共同控制油气成藏。 - Setting brazing temperature for660 ℃ and speed of net belt to1200mm/ min with ANSYS finite element model of optimized process parameters as the theoretical basis, which also obtains to meet the requirements of brazing joint.
以.ANSYS有限元模型优化后得到的工艺参数为理论基础，将钎焊温度设定为660℃，网速改为1200mm/min，同样获得了符合要求的钎焊接头。 - Getting the tension distribution in belt width through analysis the belt in transition section and turnover section can provide certain theoretical reference for the design and research of the conveyor belt joint.
对输送带过渡段和翻转段进行分析，得到输送带在宽度方向张力的分布情况，进而为输送带接头的设计研究提供一定的理论参考。